Resurfacing a pool typically takes 1 to 2 weeks, though the time required can vary depending on factors like the size and condition of the pool, chosen materials, weather conditions, and the experience of the crew. Here’s a step-by-step overview of the process, highlighting typical time requirements for each stage: For more information please visit poolresurfacingphoenix.net

1. Drain the Pool (1 Day)

  • Process: Technicians pump out the water, usually taking a few hours to a day for standard-sized pools.
  • Considerations: Groundwater and weather conditions can affect how long draining takes and must be managed carefully to avoid structural damage.

2. Surface Preparation (2–3 Days)

  • Process: The existing pool surface must be prepared by stripping away the old plaster, paint, or coating, often with sandblasting or hydro-blasting. Any cracks, holes, or structural issues are repaired at this stage.
  • Considerations: For older or heavily damaged pools, this stage may take longer due to additional repairs.

3. Applying New Surface Material (1–3 Days)

  • Process: After prepping the pool, the resurfacing material—plaster, pebble, quartz, or tile—is applied. Common materials include:
    • Plaster: Usually applied in two coats and can take about a day.
    • Pebble Finish: Installed and then smoothed out; takes about 2–3 days, allowing time for curing.
    • Tile: The most labor-intensive and could take a week or more for intricate designs.
  • Considerations: Drying and curing times can vary, so it’s essential to allow proper drying between layers.

4. Acid Wash (Optional, 1 Day)

  • Process: An acid wash may be applied to etch the surface, enhancing the appearance and durability of finishes like plaster or pebble. This step is optional and depends on the type of material used.
  • Considerations: This process takes only a few hours but requires thorough rinsing to remove acid residue.

5. Refilling the Pool (1–2 Days)

  • Process: The pool is refilled with water, which can take anywhere from a few hours to over a day, depending on pool size and water pressure.
  • Considerations: A freshly resurfaced pool requires careful filling to avoid disturbing the new surface.

6. Water Balancing and Initial Start-Up (1–2 Days)

  • Process: To protect the new surface, a pool technician adjusts water chemistry, monitoring pH, alkalinity, and calcium hardness levels.
  • Considerations: This step is crucial for preventing early staining or scaling and to ensure the surface cures properly.

Factors Influencing Resurfacing Time

  • Material Choice: Plaster generally cures faster than pebbles or tiles.
  • Weather: High humidity or rainy conditions can extend drying and curing times.
  • Size and Shape: Complex shapes or larger pools increase the time needed for each step.

Summary Timeline

  • Total Time: 7 to 14 days on average.
  • Breakdown:
    • Draining: ~1 day
    • Surface Prep: ~2–3 days
    • New Surface Application: ~1–3 days
    • Acid Wash (optional): ~1 day
    • Refilling: ~1–2 days
    • Water Balancing: ~1–2 days

Allowing adequate time at each stage ensures a durable and lasting resurfacing job.